HPS 4.5" OD, 45 Degree Bend Aluminum Elbow Tubing, 6" Leg Length on Each Side, 6" Clr, 6061 T6 Seamless 16 Gauge, Wall Thickness: 0.065", ALE45-91753, 4.5" OD, Aluminum

HPS 4.5 inch OD 45 degree bend 6061 aluminum elbow tubing 14 gauge with 6 inch leg Length on each side and 6 inch center line radius is commonly used in industrial, automotive, marine and aerospace industry; great for custom fabrication project such as DIY air intake, cooling systems, Turbo intercooler piping setup because 6061 aluminum is the most popular and versatile alloy, and is the least expensive of the heat treatable aluminum alloys. HPS 4-1/2 inch (114mm) 45 degree bend aluminum round tubing is sold in the T6 condition, ideal for sawing, machining, sanding, and polishing. HPS 45 degree bend aluminum elbow pipe can be polished, but due to the softness of the aluminum, care must be taken not to remove too much material, especially in the area near any welds. Technical specification: product Type: 45 degree bend aluminum elbow. Material: 14 gauge 6061-T6 aluminum. Tubing outside diameter: 4-1/2 inch (114mm). wall thickness: 0.079 inch (2mm). leg Length on each side: 6". center line of radius: 6". remark: HPS does not recommend 6061 aluminum to be used for exhaust systems.

• Tubing outside diameter: 4-1/2 inch (114Mm). leg length on each side: 6 inch
• 45 degree bend. Center line radius: 6 inch
• 6061 T6 seamless aluminum. Wall thickness: 14 gauge (0.079 inch)
• Commonly used in industrial, automotive, marine and aerospace industry; great for custom fabrication project such as diy air intake, cooling systems, turbo intercooler piping